he Siser Glitter 2 is a heat transferable flex film for textiles and has large glitter particles for brilliant eye-catching designs. The Siser Glitter 2 can be integrated in designs also using other flock or flex films or can be used for larger designs that really stand out.
Instructions
Please note that the Siser Glitter 2 flex film has an average thickness of 350 µ and can only be cut using a professional vinyl cutter with a knife pressure of about 115 g. The Siser Glitter 2 is not suitable for small lettering or fine details. The large glitter particles cause a high amount of wear on blades.
Prepress garment for 2 – 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
Temperature
160 °C |
Time
15 sec. |
Pressure
Approx.
3,5 bar |
Remove Liner
Cold or
warm |
Second Pressing
No |
Washable at
40 °C |
Dry Cleaning
No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.